Why should the screw and barrel surface of the air cushion film machine be coated with anti rust oil? The bubble film produced by the air cushion film machine is a kind of anti pressure, moisture-proof and shockproof chemical product, which is processed with high-quality polyethylene resin and used for packaging and filling, and is widely used in the logistics industry.
The air cushion film machine shall be overhauled regularly. The air cushion film machine shall be thoroughly cleaned every three months. The lubricating grease of various bearings shall be replaced every three months. The lubricating oil of the reducer shall be replaced every six months. The overall equipment shall be overhauled every two years. Check whether the temperature control of the air cushion film machine is in good condition, whether the heating elements are in good condition, and whether the temperature of each point is within the index range to ensure the normal operation of the machine.
When the air cushion film machine is feeding into the hopper, it must be kept clean, and metal debris, sand and small tools must be strictly prevented from entering the feed opening to prevent damage to the barrel and screw. If abnormal noise is found during operation, it should be stopped immediately for treatment.
The screw of the air cushion film machine should be properly treated to prevent deformation when it is taken out of the barrel for some reason. If it is not installed back into the barrel for a long time, the screw must be vertically hung to prevent bruise, bending and permanent deformation. The barrel and screw surfaces should be coated with antirust oil for protection.
