Mar 28, 2023Leave a message

The operating regulations of the bag making machine

The operating regulations of the bag making machine include four aspects: preparation, booting, stopping, and packing before booting. details as follows:

 

1. Preparation before booting:

Check whether there are dust and debris around the equipment, and remove it; apply a good membrane roll according to the requirements of the production notice; adjust the size of the bag according to the production notice and process files, install the hot sealing knife, and adjust the score preliminary adjustment. The position of the cutting knife and the hot knife; turn on the power supply, set the hot knife temperature according to the process file requirements; enter the relevant data of the bag making and the number of each tie; the pattern with a large color difference can adjust the sensitivity along the left and right.

 

2. Push:

The main motor operates at low speed, and then adjusts the side control, and the membrane pairs are in the middle position; adjust the left and right clip rollers to allow the left and right membranes to align, adjust the front and rear rollers, and make the pattern. The range of the bag; adjust the score -cut blade to the required position, and adjust the punch position to the scissors. Adjust the speed of the machine for a preliminary inspection; check the quality inspection of the machine platform, and check the qualified certificate.

 

3. Disposal:

Disgle the total power switch, and then disconnect the power switch of various parts; clean the machine's hygiene and venue hygiene, and send the product to the general inspection room; make a good record, require accurate and cleanliness.

 

4. Packing:

Persons' staff sort out this process product, select unqualified products with quality defects, bundle the qualified products, and hand over the quality inspector for inspection; After the quantity and quality are qualified, put it in the box as required and put it in the box; the general quality inspector will check the inspection product according to the prescribed proportion, and the inspection is inspected and packaged into the warehouse.

Send Inquiry

whatsapp

Phone

E-mail

Inquiry