1. Close the total power switch of the machine tool, check whether the high -speed bag making machine leaks power, and preheat the tube and mold according to the set process temperature requirements. When the temperature of the barrel temperature reaches the process temperature The temperature of each part is uniform. If the abnormal phenomenon is not found, the oil pump can be officially launched. It can only be operated after the "motor is opened" on the screen to check whether the role of the safety door is normal.
2. Manually mobilize the screw rotation, check the sound of the screw rotation sound or stuck.
3. The operator needs to use the safety door. If the safety door itinerary switch fails, it is forbidden to turn on, and it is forbidden to use the safety door (cover) operation.
4. The electrical appliances, hydraulic and rotating parts of the operating equipment should be covered and fixed.
5. Non -dwelling operators, do not allow each button and handle without promising, and do not operate the same high -speed bag making machine together.
6. When the machine repair or a long time (more than 10 minutes) to organize the mold, first retreat the tube seat and leave the nozzle to leave the mold, turn off the motor, and when the maintenance personnel are repaired, the operator ban off the post.
7. When the body enters the machine tool or when the mold is opened, the power is cut off to avoid the dangerous area. When organizing the tapped head, it is forbidden to sort it directly by hand, apply iron tongs or other things to avoid burns. Climb and place items to avoid scalding, shock and fire.
8. In the absence of feeding, the use of metal rods, rods, rough stabs to avoid damaging the inner screen, screen cover and magnet holder of the bucket. The severe damage equipment of the tube.
9. When the machine tool is found to be abnormal, odor, odor, spark, oil leakage and other abnormalities during the operation of the machine tool, it should be disclosed to the relevant personnel, and the fault phenomenon and the possible cause of the occurrence should be explained.
10. Pay attention to safety operations and do not promise to make the operation method that may cause damage or damage equipment.
