The vest bag machine must operate the packaging machine and equipment by fixed personnel, and can be proficient in booting and bag making programs. It will simply debug in instrumentation, and change parameters. Performance, work procedures, operation mode, work status, common fault investigation and treatment; the computer instrument is strictly prohibited by personnel. The daily maintenance of the vest bag can ensure that the inside and outside of the computer instrument box must be cleaned and dry; the regular inspection of the wiring terminal is not loose or off. Ensure that the circuit and the air path are smooth.
Basic cleaning of the vest bag bag machine includes:
1. The vest bag maker should be cleaned in time after stopping. For example, the sugar, plate Lantan granules, salt, etc. are packed. It is necessary to ensure that each class is cleaned and turntables to make them from corrosion.
2. For thermal sealing body, it should be cleaned frequently to ensure that the texture of the vest bag is clear.
3. Optoelectronics tracking bald head, that is, electric eye, should also be cleaned regularly to ensure a small error of the cursor tracking.
4. The material scattered on the plate needs to be cleaned in time to keep the machine clean.
5. Clean the dust in the electrical control box regularly to prevent failure such as poor contact. The new vest bag bag making machine must be inspected and fastened by the transmission and activity components within one week.
Basic maintenance of the vest bag bag making machine:
1. Check the screws of each part of the packaging machine when the vest bag is fixed to avoid loosening.
2. Vehral bag making machine pays attention to the waterproof, moisture -proof, anti -corrosion, and rat prevention of the electrical part. The electrical control box and the wiring terminal must be kept clean to prevent electrical failure.
3. When the vest bag is stopped, the two hot rollers should be opened in the open position to prevent hot packaging materials.
4. Right to the gear meshing of the vest bag machine, the shaft of the shaft to attract the oil holes and the motion component to add the oil lubrication. When adding lubricating oil, please be careful not to drip the oil on the transmission belt to prevent it from slipping or rejuvenating the belt.
