How to choose the inverter of a fully automatic bubble film machine? This is related to the service life of all automatic bubble film machines. Remind everyone that the inverter of the bubble film machine can not only extend the service life of the bubble film machine, but also avoid the damage of the bubble film machine in daily applications.
The weight of a fully automatic bubble film machine is usually about 2 tons, but the machines and equipment of many customers are overloaded. If the packaging items are too heavy, some bubble film machines may not meet the requirements. The actual operation may damage the bubble film machine or shorten the life of the machine.
If the output power of the inverter used by the customer is lower than the rated power of the motor, or the load that is placed on the wheels exceeds the packaging machine, the inverter will suddenly turn off the automatic air bubble film machine. At this time, customers can restart the recovery of machinery and equipment, but in long -term work, the electronic components of the inverter will become very damaged and fragile.
The wheel disk must have great driving force during the entire wheel disk. Because the automatic bubble film usually uses DC frequency conversion speed adjustment, the driving force comes from the motor. Therefore, related motors are needed. Generally speaking, the output power of the inverter should be greater than or equal to the output power of the motor. This makes the overall operation of the machine and equipment relatively stable. Therefore, if the customer's product is light, choose a small inverter; if the customer's product is heavier, choose a large inverter. Customers need to choose the appropriate inverter according to their special circumstances.
What are the correct operation procedures for fully automatic bubble film machines?
The key point of the bubble film machine is that when the device is actually running, the operator cannot stand in front of the device to avoid accidents and damage the actual operator. At the same time, it is also prohibited from adding metal residues or other hard blocks to the barrel to avoid damaging the equipment during feeding. In the actual operation of the rotating device, wearing gloves is prohibited to prevent device damage.
Before the bubble film machine operates, it will regularly check the lubrication of the reducer and air compressor, and check the lubrication of the rotation site of the mechanical equipment. The parts become too dry, causing device damage and noise. At the same time, check whether the wiring of the switching power supply is disconnected, whether the power supply is closed, and whether the equipment is damaged. Before actual operation, ensure the safety of each component and prevent production safety accidents.
What are the correct operation procedures of the bubble film machine?
1. Before starting the machine, you need to increase the temperature of each temperature controller to the required temperature according to the processing program, and keep the machine for more than 30 minutes before starting the machine. Do not start before reaching the temperature. Prevent bubble film machines that are damaged by bubbles.
2. The product has the characteristics of waterproof, impact resistance, sound insulation, aesthetics, insects and mildew, anti -mildew, quality and low price and low price. The warehouse should be clean and tidy. The dirt and sand of metal materials and practical tools should be left away from the inlet mouth to prevent the barrel and extrusion screw. If abnormal noise is found during operation, it needs to be repaired. Need to be closed immediately.
3. Check whether there is a problem with the automatic temperature control of the air bubble film, whether there is a problem with the heating part, and whether the temperature of each point is within the index value range to ensure normal operation.
4. Observe whether the thickness of the plastic film is symmetrical and whether it meets the requirements. If you do not match, you need to replace it.
5. Maintenance must be completed on time. Wash the bubble film machine every 3 months, and remove the grease of various rolling bearings every 3 months.
