Full -automatic air bubble film manufacturer: The indispensable mechanical and equipment during the manufacturing process of air bubble film is a bubble film machine. The bubble film is actually a film with a bubble mezzanine in the center of the membrane. If the bubble film machine is not controlled properly, it is likely that the quality and output of the product will not be so ideal due to the limitation of time and materials. Instead, by proper control of the bubble film machine, under a limited time and materials, your product is not only high in quality, but also sufficient output.
Fully automatic air bubble film manufacturers briefly introduce how to regulate our operation of our bubble film machine:
1. Make sure that there is no problem with the automatic mild heater. Pay attention to adjust the heating temperature in time within the indicator range.
2. Check the traction speed and control the thickness of the paint film.
3. Observe the uniformity of the thickness of the posterior membrane, whether the folding diameter meets the standard.
4. Check the pressure of the cylinder. It should not be too high, but it needs additional pressure.
5. Control the proportion of raw materials and mix well.
6. Check whether the raw materials have impurities. In particular, ensure that iron and magnets are mixed in time.
7. Check the position of the gear box and the lubrication of the air compressor cylinder.
8. Regularly check the temperature rise of each motor and the transmission of the bubble film machine during the operation.
Full automatic air bubble film machine manufacturer: How to choose the inverter of the air cushion film machine?
Selection of air cushion film frequency frequency frequency. This is related to the service life of all air cushion film machine equipment. The selected inverter can not only extend the service life of the air cushion film machine, but also avoid the damage of the air cushion film machine in daily use.
The weight of the air cushion film machine is usually about 2 tons, but many of our customers' machines and equipment are overloaded. If the packaging items are too heavy, some air cushion film machines may not meet the requirements. Force operation may damage the air cushion film machine or shorten the life of the machine. Therefore, in this case, it is important to create your own order to handle the load problem of the packaging of the packaging ultra -heavy rotation material. It is important to start with the wheel disk and inverter.
The thickness of the thick steel plate of the automatic air cushion film machine is generally about 8 mm. There are 6 nylon roller fixed support points at low -end. In addition, these six nylon lazular wheels can also run, thereby driving the wheel operation.
If the output power of the inverter used by the customer is lower than the rated power of the motor, or the object placed on the wheel disk exceeds the load of the wound packaging machine, the inverter will suddenly turn off the automatic air cushion film machine. At this time, the mechanical equipment can be restarted, but in long -term work, the electronic components of the inverter will become very damaged and fragile. In the long run, this machine will eventually fail.
