How to choose a full -automatic bubble film variable frequency? This involves the service life of all automatic bubble film machine equipment. Remind everyone that the inverter of the bubble film machine can not only extend the service life of the bubble film machine, but also avoid the damage of the bubble film machine in daily applications.
The weight of a fully automatic bubble film machine is usually about 2 tons, but the machines and equipment of many of our customers are overloaded. If the items you packaged are too heavy, some bubble film machines may not meet the requirements. The actual operation may damage the bubble film machine or shorten the life of the machine. Therefore, in this case, it is important to create your own order to handle the load problem of packaging ultra -heavy rotation materials. It is important to start with the wheel disk and inverter.
The thickness of the full -automatic bubble film is generally about 8 mm. There are 6 nylon roller fixed support points at low -end. In addition, these six nylon rollers can also run, thereby pushing the wheel disk operation.
If the output power of the inverter used by the client is lower than the rated power of the motor, or the object placed on the wheels exceeds the load of the packaging machine, the inverter will suddenly turn off the automatic air bubble film machine. At this time, customers can restart the recovery of machinery and equipment, but in long -term work, the electronic components of the inverter will become very damaged and fragile. In the long run, this machine will eventually fail.
The wheel disk must have great driving force during the entire wheel disk. Because the automatic bubbler machine usually uses DC frequency conversion speed, the driving force comes from the motor. Therefore, related motors are needed. Generally speaking, the output power of the inverter should be greater than or equal to the output power of the motor. This makes the overall operation of the machine and equipment relatively stable. Therefore, if the customer's products are lighter, choose a small inverter; if the customer's product is heavier, choose a large inverter. Customers need to choose the appropriate inverter according to their special circumstances.
