For the winding film machine, it is very important to do a good job of debugging. What are the debugging tasks for the winding film machine?
1. There are many parameters for setting on the control panel of the film winding machine, which must be set in time before production.
2. After purchase, the wrapping machine should be set according to the product parameters to be packaged, such as how many layers of wrapping film the product needs to wrap, and how many times it runs up and down. This requires the customer to set according to the actual situation of the product. After purchase, the customer can set it himself, and open the control panel.
3. When winding articles, the winding film must pass through the mold base, but the winding film must also be fixed on the mold base, and then fixed on the winding article, so that the winding film can normally wind the product when the mold base rises or falls.
