For the bubble film machine, in the process of use, if there is a fault, it will affect people's use. What causes problems with the bubble film machine?
1. In order to solve the problem that the expansion rate of the product is too large, which leads to instability of the membrane bubble, left and right swing, and easy wrinkling, it is necessary to reduce the expansion rate of the foam machine appropriately.
2. Low extrusion temperature and poor resin plasticization result in poor film transparency after blowing by bubble film machine. The solution is to appropriately increase the extrusion temperature to make the resin evenly plasticized.
3. Adjust the cooling device to ensure uniform air flow at the air outlet and uniform film thickness. Therefore, when the air supply around the cooling air ring is inconsistent, resulting in uneven cooling effect, it needs to be adjusted.
Therefore, the problems of bubble film machine should be solved in time to ensure its good performance.
