How to operate the pearl cotton bag making machine correctly? Correct operation can prolong the life of the pearl cotton bag making machine.
1. Assign special personnel to operate the pearl cotton bag making machine, and do not allow the extruder screw to idle without material, so as to avoid scratching the screw and the barrel. After shutdown, if there is material stored in the barrel, before restart, the temperature of each temperature zone must be raised to the specified requirements according to the process requirements, and the machine can only be started after holding for more than 30 minutes. It is strictly prohibited to start the machine before the temperature reaches the requirements, so as not to damage the machine parts.
2. If the screw is taken out of the barrel for some reason, it should be properly treated to prevent deformation. If it is not installed back into the barrel for a long time, the screw must be vertically hung to prevent bruise, bending and permanent deformation. The barrel and screw surfaces should be coated with antirust oil for protection.
3. After the pearl cotton bag making machine (pearl cotton bag making machine) is shut down, if there is material stored in the machine barrel, the temperature of each temperature zone must be raised to the specified requirements according to the process requirements, and the machine can only be started after holding for more than 30 minutes. It is strictly prohibited to start the machine before the temperature does not meet the requirements, so as not to damage the machine parts
4. The pearl cotton bag making machine (pearl cotton bag making machine) shall be overhauled regularly, the die head shall be thoroughly cleaned every three months, the lubricating grease shall be replaced for various bearings, the lubricating oil shall be replaced for the reducer every six months, and the overall equipment shall be overhauled every two years.
The above is the correct operation of the pearl cotton bag making machine.
