How does the bubble film machine produce bubbles? In the bubble film production process, the indispensable mechanical equipment is the bubble film machine. Bubble film is actually a kind of membrane containing bubble interlayer in the middle of the film. If you can't control the bubble film machine well, it is likely that your product quality and output are not so ideal under the limited time and material limitations; On the contrary, if you control the bubble film machine well, your product quality will not only be high quality, but also the product output will be very full under the limit of limited time and materials. How to standardize the operation of our bubble film machine? Here is a brief introduction.
1. Check whether the temperature self-control is in good condition and the heating appliances are in good condition. Pay attention to timely adjust the heating temperature at each point within the index range.
2. Check the traction speed and control the film thickness.
3. Observe and adjust the uniformity of the film thickness, and the folding diameter meets the standard.
4. Check the pressure of air storage cylinder, which shall not be too high, but shall have standby pressure.
5. Check and control the proportion of raw materials and mix them evenly.
6. Check whether there are impurities in the raw materials, especially use magnets to check the iron mixing in time.
7. Check the lubrication of the lubricating oil of the reduction gearbox position and the air compressor cylinder.
8. Regularly check the temperature rise of each running motor and the transmission of the bubble film machine.
Through the above introduction, you should know how the bubble film machine produces bubbles!
