The main point of the bubble film machine is that when the device is actual operation, the operator cannot stand in front of the equipment to avoid accidents, cause damage to the actual operator, and also prohibit adding metal residues or other hard blocks to the tube to avoid damaging the equipment when adding feeding. In the actual operation of the rotating equipment, wearing gloves is strictly prohibited to prevent device damage.
Check the lubrication of the reducer and the air compressor on a regular basis before the operation of the bubble film machine, and check the lubrication of the rotating part of the mechanical equipment. The parts become too dry, causing device damage and noise. At the same time, check whether the connection of the switching power supply is disconnected, whether the power supply is closed, and whether the equipment is damaged. Before the actual operation, ensure the safety of all components and prevent production safety accidents.
What are the correct operation procedures for the bubble film machine?
1. Before turning on, the temperature control device needs to be raised to the requirements according to the processing program, and maintains more than 30 minutes before turning on. Starting before reaching the temperature. Prevent air bubbles from destroying air bubble film machines.
2. The products produced by the bubble -brewing film machine have the characteristics of waterproof, impact resistance, sound insulation, noise reduction, beautiful appearance, insect -proof and mildew, quality and low price and low price. Stay away from the inlet port to prevent damage to the barrel and extrusion machine screw. If abnormal noise is found during operation, it needs to be repaired. Need to be closed immediately.
3. Check whether there is a problem with the automatic temperature control of the air bubble film, whether there is a problem with the heating site, and whether the temperature of each point is within the indicator value range to ensure normal operation.
4. Observe whether the thickness of the plastic film is symmetrical and whether it meets the requirements. If you do not match, you need to replace it.
5. Maintenance must be completed on time. The bubble film machine should be cleaned once every 3 months, and the oils of various rolling bearings should be removed every 3 months.
