What are the normal operation methods of the bubble film machine? When operating the bubble film machine, it is very important to master the correct operation method. So what is the correct operation method of the bubble film machine? Let's take a look.
1. Check the ratio of raw materials and mix well.
2. Check whether the temperature control of the composite air bubble film machine is good and whether the heating electrical appliances are intact. Pay attention to adjusting the heating temperature of each point in time within the indicator range.
3. Observe the thickness of the membrane, and the folding diameter meets the standard.
4. Check whether there is impurities on the raw materials of the composite air foam film machine, especially the iron mixed with magnets.
5. Regularly check the temperature rise of the motor and the bubble film machine running the motor of the composite air blister film machine.
6. Check the traction speed and control the thickness of the film.
7. Check the pressure of the gas storage tank of the composite air foam film. Don't be too high, but there must be spare pressure.
8. Check the lubrication of the reducer and air compressor cylinder.
Therefore, when operating the bubble film machine, these details must be done well in order to ensure their good performance.
What are the operation details of the bubble film machine? The correct operation of the bubble film machine affects its service life, so it is necessary to master some of the operation details of the air bubble film machine. Let's follow the editor to understand what details are there.
1. Check the speed, control the thickness of the film, so that the production process has no deviation and the quality is improved.
2. Detection of temperature rise and mechanical transmission of each motor to ensure the need for normal production.
3. Regularly check the working temperature, if there is an abnormal temperature, it is necessary to deal with it in time.
4. Observe whether the thickness of the film is uniform, and whether the width of the film blowing the film blows the width of the film, and adjust it in time.
5. Check the lubrication of the reducer and air pressure machine cylinder during startup.
