Installation of bubble film bag making machine

When the bubble film bag making machine is installed, it is necessary to adjust the center line of the extruder head and the center of the traction roller to keep horizontal and vertical, and not deviate from the skew.When winding up, as the winding outer diameter gradually increases, please pay attention to the coordination between the traction speed and the winding speed, and please adjust it in time.After the host is started, pay close attention to the operation of the host, and timely adjust, correct, electrical instruments and controllers to ensure its normal operation.The main engine gear box and traction reduction box should be constantly refueled and replaced with gear oil. The new machine should be replaced with new gear oil in about 10 days to ensure the normal operation of the rotating parts. Attention should be paid to refueling to prevent jam and overheating damage.The compressed air in the bubble tube should be kept in appropriate amount, because the compressed air will leak out during the traction process. Please replenish it in time.