How does the bubble film machine produce bubbles? The indispensable mechanical equipment in the production process of bubble film is the bubble film machine. The bubble film is actually a kind of membrane with a bubble interlayer in the middle of the film. If you can't control the bubble film machine well, it is very likely that your product quality and output will not be so ideal under the limited time and material constraints; on the contrary, if you control the bubble film machine well, under the limited time and material constraints, your product quality is not only high-quality, but also the product output is very full. So how to standardize the operation of our bubble film machine, the following is a brief introduction for everyone.
1. Check that the temperature control is intact, the heating appliance is intact, and pay attention to timely adjust the heating temperature of each point within the indicator range.
2. Check the traction speed and control the film thickness.
3. Observe and adjust the uniformity of the film thickness, and the folding diameter meets the standard.
4. Check the air storage cylinder pressure, which should not be too high, but there should be a spare pressure.
5. Check and control the raw material ratio and mix evenly.
6. Check whether the raw materials have impurities, especially use a magnet to check for iron inclusions.
7. Check the lubrication of the reducer and the air compressor cylinder lubricating oil.
8. Regularly check the temperature rise of each running motor and the transmission of the bubble film machine.
Through the above introduction, everyone should know how the bubble film machine produces bubbles!
