Full automatic air bubble film manufacturer: How to emphasize the purity of the materials used in the air cushion film machine? Due to the different techniques and materials used by each manufacturer, the quality of the air cushion film machine will be different. What is the impact of the material purity of the air cushion film machine on the air cushion film machine?
The quality of the air cushion film machine varies from the manufacturer, but the quality of the air cushion film machine made by pure materials is relatively good.
Some manufacturers are gradually decreasing. The air cushion film machine is made of raw materials and impurities, the quality decreases significantly, and it has a adverse effect on the environment. The purely material air cushion film machine is not only beautiful, but also light weight, can withstand the tension of heavy objects.
In summary, the pure material air cushion film machine is very good in terms of gloss, transparency, and color.
Full automatic air bubble film manufacturer: The installation and adjustment of the bubble film machine is as follows:
1. The bubble film machine does not have chemicals such as dust, flammable and explosive substances, chemicals, etc., and the temperature range is -10-40 degrees. It is necessary to install it in a dry indoor air without freezing.
2. Connect a part of the electromagnetic coil wheel to the flat ground, and connect the positioning to the rotation part of the film system software. In addition to the purchase spare parts, the installation is cut to the inclined surface, push the lower products and wheels to the same plane, pay attention to the gap between the parts and the wheels, and install the foot bolt.
3. Check the other components of the air cushion film machine. The cable should loosen or fall off, and the fixed part should be loose or shed. Also check the power cord.
4. It is strictly forbidden to provide a stable and reliable fixed switch power supply (temporary).
5. The motor and the inductance are connected in accordance with the corresponding power cord, and the switching power supply connected to the equipment connected to the switch power supply determines the correct road detection and adjustment. Remove when the product direction is connected to the motor. The operation direction must be manual mode.
Full automatic air bubble film manufacturer: The correct maintenance method helps improve the service life of the bubble film machine.
Bubble film machine is made of high -quality polyethylene resin. It is a common packaging material and a material. Wide range of applications. The middle layer of the bubble film machine is full of air, which has the characteristics of light, flexible, sound insulation, impact resistance, and wear resistance. Bubble film machines can replace protective products such as foam plastic particles fillers. They are the main options for protective packaging sellers such as electronic products, cosmetics, audio and video discs.
