Shrink Wrap Machine Turntable

Introduction

The Shrink Wrap Machine Turntable mainly consist of rotating turntables and sealing systems. We place the products on the turntable and pack them through continuous rotation. The plastic film is also sealed to ensure that the product is fully wrapped, sealed, and protected. Due to its efficient sealing function, a long shelf life of the product is ensured. Secondly, our maximum extrusion capacity is 120kg/h and the maximum mechanical line speed is 120m/min. Finally, we have adjustable turntable speed and sealing force to accommodate different product sizes and characteristics.

 

Feature

High degree of automation
The Shrink Wrap Machine Turntable adopt a highly automated equipment control system, which can realize automatic packaging, sealing and cutting, shrinking and other functions, which greatly improves production efficiency.

 

Significantly increased packaging speed
Our rotary design is able to automatically switch the goods that need to be packed to the sealing and cutting machine, avoiding the manual handling of items, thus greatly improving the speed of packaging.

 

Large pallet capacity
Our products are reasonably designed to accommodate a variety of sizes and weights, and our total installed capacity is 68KW and mechanical weight is 6000KG, which has the characteristics of large pallet capacity and can accommodate more goods for packaging.

 

High reliability
We use advanced automation technology and high-quality components to achieve very high reliability and stable operation for a long time.

 

Easy to operate
Our products are designed to be simple and easy to operate, and operators can get started with simple training. In addition, we are equipped with safety protection devices to ensure safe operation.

 

 

 

Packaging Requirements:	Bubble film and wrapping film packaging
Loading requirements:	A 17.5m flatbed truck
Installation requirements:	On-site installation and technical guidance
Quality assurance	The quality of the whole machine is guaranteed for 1 year
Power supply:	Voltage: 380V, 50HZ, 3-phase 4-wire
Air supply:	7.5KW screw air compressor, 1 cubic air storage tank, providing constant pressure air source above 6KG
Floor area:	The machine covers an area of about 50 square meters and requires storage space

This machine is mainly used for the production of stretch film and is mainly used for centralized packaging of various items. Secondly, our products are used for multi-layer wrapping of goods stacked on pallets. And through the self-adhesive effect of the film and the film, the packaging is more stable, neat, and has a strong waterproof effect. Finally, it is widely used in express logistics packaging.

 

 

Scope of application:	LLDPE resin
Working principle:	extrusion tape casting
Film structure:	ABA
Distribution ratio:	30% and 70%
Maximum width of product winding:	500mmX2
Maximum diameter of product winding:	300mm
Maximum extrusion capacity:	120kg/h
Maximum mechanical linear speed:	120m/min
Maximum extrusion thickness:	0.05mm
Minimum extrusion thickness:	0.006mm
Mechanical voltage:	3-phase 4-wire, 380V, 50HZ
Total installed capacity:	68KW
Mechanical dimension:	2mX3mX2.5m (LXWXH)
Mechanical weight:	6000KG

 

 

The main control system of the whole machine

1. The main control system of the whole machine is mainly composed of PLC control system, color touch-type human-machine interface, drive motor, AC digital loss inverter and electrical control cabinet. It is mainly used as the operation control part of the whole machine. The advanced control system can Make the whole machine run smoothly and efficiently.

2. Programmable Logic Controller (PLC): 1

3. Color touch man-machine interface: 1 set

4. Electrical control cabinet: 2 units

 

Host screw extrusion unit

1 Extrusion screw diameter: 55mm, 70mm

2. Hardened gear reducer: Type 146, Type 173

3. Motor power: 18.5KW, 22KW

4. Inverter power: 18.5KW, 22KW

5. Screw length-diameter ratio: 32:1

6. Material of screw and barrel: 38CrMoALA is ammoniated, high-speed wear-resistant double alloy

7. Screw structure: special type for high output

8. Speed regulation mode: frequency conversion speed regulation

9. Barrel heating method: cast aluminum heating ring

10. Barrel cooling method: low noise blower cooling

11. Total power of barrel heating: 27KW

12. Barrel heating section: 5 zones

13. Quick screen changer: 2 sets

14. Distributor: co-extrusion distributor (swing structure)

15. Hierarchical Allocation: A-B Compounding

16. Distribution ratio: 30%-70%

17. Distributor heating: stainless steel electric heating tube heating

18. Distributor heating power: 8KW

 

Host extrusion die

1. The extrusion flat die head is mainly made of multi-layer imported die steel after special quenching and tempering. It has a built-in hanger-type runner. The surface of the built-in runner is plated with imported hard chrome material, which has high hardness, anti-corrosion, Reduce resin adhesion and wear on the runner of the flat die.

2. Extrusion flat die width: 1250mm

3. Extrusion flat die material: 5CrNiMo

4. Maximum extruded film width: 1000mm

5. Die lip opening width: 0.9mm

6. Polishing accuracy: 0.02-0.04un

7. Hard chrome plating on the flow surface of the die head: 0.06-0.08 un

8. Hardness: 60-65 Rockwell Hardness

9. Thickness of chrome plating on outer surface: 0.01-0.02mm

10. Heating temperature zone: 7 zone

11. Heating power: 25KW

12. Heating method: internal heater

 

Traction cooling device and transmission system

1. The traction mirror cooling roller adopts spiral flow channel, ultra-fine grinding, electroplating hard chrome, cooling water cooling, etc.

2. Diameter of the first cooling mirror roller: 420mm

3. Effective length of the first cooling mirror roller: 1250mm

4. Diameter of the second cooling mirror roller: 420mm

5. Effective length of the second cooling mirror roller: 1250mm

6. The rewinding traction roller is super finely ground and electroplated with hard chrome

7. The diameter of the first rewinding traction mirror roller: 420mm

8. The effective length of the first rewinding traction mirror roller: 1250mm

9. Diameter of the second rewinding traction mirror roller: 420mm

10. Effective length of the second rewinding traction mirror roller: 1250mm

11. Quantity of transition aluminum rollers: 3

12. Diameter of transition aluminum roller: 80mm

13. Length of transition aluminum roll: 1250mm

14. Number of unrolled aluminum rollers: 2

15. Diameter of unfolded aluminum roller: 80mm

16. Length of unfolded aluminum roller: 1250mm

17. Edge material processing method: automatic edge material recovery machine

18. Drive motor power: 2.2KW

19. Drive motor inverter power: 2.2KW

20 Speed regulation mode: frequency conversion speed regulation

 

 

 

 

 

 

Q1. Are you a factory or a trade company?

A1: We are manufacturer ,direct supplier from China.

 

Q2. Where is your factory located in,how can I visit the factory ?

A2: Our factory is located in wenzhou city , China .welcome to visit our factory ,you will get our warmly reception teart.

 

Q3. What is your lead time?

A3: Within 15-20days after recived your deposit or original L/C.

Hot Tags: shrink wrap machine turntable, China shrink wrap machine turntable manufacturers, suppliers, stretch foil machine, pallet wrappers, industrial shrink wrap machine, sleeve wrapping machine, stretch pallet wrapping machine, warehouse wrapping machine