What problems are easy to occur when using bubble film machine? Now the bubble film machine manufacturer will summarize for you. In the process of using the bubble film machine, there will be many problems. What are the problems that bubble film machine is prone to have? Let's get to know.
The bubble film machine shall be operated by a specially assigned person. It is not allowed to idle the extruder screw without material to avoid scratching the screw and barrel. After shutdown, if there is material stored in the barrel, before restart, the temperature of each temperature zone must be raised to the specified requirements according to the process requirements, and the machine can only be started after holding for more than 30 minutes. It is strictly prohibited to start the machine before the temperature reaches the requirements, so as not to damage the machine parts.
When the bubble film machine is feeding into the hopper, it must be kept clean, and metal debris, sand, gravel, small tools, etc. must be strictly prevented from entering the feed opening to prevent damage to the barrel and screw. If abnormal noise is found during operation, it should be stopped immediately for treatment.
