The Following Are The Precautions For The Operation Of The Winding Film Packaging Machine

1. It is forbidden to test the voltage between the DC motor control board of the winding machine and the PLC input point and the ground wire.
2. It is strictly prohibited to move or remove the upper and lower fixed limit block.
3, winding film packaging machine turntable should be run in a clockwise direction.
4. It is strictly prohibited to stand or stack any objects under the film system.
5, when the film system roll rotates, it is strictly prohibited to reach in or extend into other objects to prevent damage to the rubber roll or fingers.
6, it is strictly prohibited to extend the hand near the chain for maintenance or inspection during operation, or carry out other operations to prevent hand injury.
7. The operator should stand in a safe place at a certain distance from the turntable when the winding film packaging machine is running. When the machine stops a working process, it should be close to the machine to prevent scattered injuries. If necessary, the safety isolation net should be installed (prepared or made separately).