Why do you know the anti -rust oil on the surface of the air cushion film machine screw and the surface of the tube? If you want to know, follow the bubble machine Xiaobian to take a brief understanding!
The air bubble film produced by the air cushion membrane machine is made of high -quality polyethylene resin. It is a chemical product used for packaging and filling pressure resistance, moisture -proof, and shockproof, and is widely used in the logistics industry. It should make regular maintenance, completely clean the air cushion membrane operation every three months, replace the grease of various bearing every three months, and change the lubricating oil to the reducer every six months. Once a big repair. Check whether the temperature self -control of the gas cushion machine is intact, whether the heating device is not intact, and whether the temperature of each point is within the indicator range to ensure the normal operation of the machine.
At the same time, the feed bucket must be cleaned to prevent metal debris, sand and small tools to enter the feed inlet to prevent damage to the barrel and screw. If an abnormal sound is found during the operation, it should be stopped immediately. The air cushion film screw is taken out of the machine tube for some reason to deal with it properly to prevent deformation. If you do not load the barrel for a long time, you must hang the screw vertically to prevent injuries, bending and permanent deformation. The tube and screw surface are applied to protective rust oil for protection.
In summary, the editor of the air bubbler is described: the reason for the reasons for the screw and the surface of the barrel on the air cushion film machine, I hope you can learn more through the introduction of the above editor. If you want to know more related knowledge, it is recommended that you pay attention to this website, and there will be related articles for update in the future.
